Purify Saltwater and Polluted Water With Solar Energy
Solar evaporation cleaning or solar desalination process, which is often used, contaminated or to make salt water drinkable. They consume only clean energy from the sun to produce drinking water.
Solar desalination plants have been installed in areas that are often plagued with shortage of drinking water, such as Australia and the Middle East, but you can use this technology to make small solar desalination plant in your own backyard.
Unlike other filtration methods, solar desalination will not need expensive equipment or spare parts, it is easy to make and environmentally friendly choice for water purification. Glue 1 pound of weight based on the glass.
Use Solar Energy to Purify Polluted Water or Saltwater
weight will be submerged in water, so make sure that you are using nontoxic, waterproof glue that is strong enough to hold both weight and glass jar. If possible, find cylindrical weight that fits base of your glass jar. Place glass jar with weight attached inside your 5-gallon bucket.
jar should be centered on floor of bucket, few inches below rim and should allow room for bucket to fill with water. Fill space around jar with contaminated water or saltwater. Make sure you are not putting any water inside glass jar, rather, between outside of jar and walls of bucket.
Imagine moat around your jar. Cover top opening of bucket with transparent plastic sheeting. Make sure your piece of sheeting is large enough to fully cover bucket’s opening without leaving any spaces through which water vapor could escape.
Secure sheeting by looping masking tape around rims of bucket. sheeting should be tight, with only slight bit of give.
We hope this information about “How to Use Solar Energy to Purify Polluted Water or Saltwater” is really helpful to you as well as other information related to Solar Energy
procedure on how to use solar energy to purify polluted water or saltwater, using solar energy to purify polluted or salt water, usings of solar e