Menu

Troubleshoot Air Conditioner in 68 Mustang

standard production Mustang 1968 were available with air conditioning system as option. Despite its design it was rudimentary compared with modern air conditioning systems, which was quite effective. system was charged with refrigerant-12, non-flammable gas, but gas can quickly freeze anything it contacts. Therefore, disassembly of refrigeration compressors or hoses should be left to professionals. However, there are several troubleshooting steps you can take secular problems to repair system noisy or faulty air conditioning Mustang 1968. Inspect belt air conditioner compressor for cracks.

broken belt should be replaced as it slides into compressor pulley and is likely to break if tightened. Check two mounting brackets air conditioning compressor is loose. Compressor supports both safe for driver’s side number of motor retaining bolts. Make sure all screws are tightened with wrench. Tighten drive belt air conditioning compressor, loosening compressor mounting brackets, then pulling away compressor motor. Press down on middle of belt with your finger.

Troubleshoot Air Conditioner in 68 Mustang

belt must have about 1/2 of inch of space. Tighten mounting brackets with wrench once belt is tight. Inspect fuse box for blown fuse.

1968 Mustang uses glass fuses. Through center of each fuse is thin metal wire. metal wire should connect to both ends of fuse.

If wire is broken, fuse is blown and must be replaced. Ensure that blower motor is connecting to its electrical supply cord. blower motor is located on passenger’s side of firewall.

single wire should be connected to motor in fitting called bullet connector.

We hope this information about How to Troubleshoot Air Conditioner in 68 Mustang is really helpful to you as well as other information related to Air Conditioner

Troubleshoot Air Conditioner in 68 Mustang Related

How to Troubleshoot Air Conditioner in 68 Mustang

Leave a Reply

Your email address will not be published. Required fields are marked *