Tile is very popular floor and wall covering in bathrooms where surfaces need to resist water and moisture. Slightly more expensive than linoleum flooring or fiberglass shower walls, tile increases the value of the house and look adds quality. Installing tile in your bathroom is the project can be completed on your own, with the right tools and preparation.
reinforce subsoil before installing the tiles. It is the commonly accepted method to smooth the layer of tile adhesive on the ground, covering it with cement board before it sets. Use screws to attach the backer board down. This provides a secure solid surface for tile.
Begin in center of your room when laying first tiles. Snap two chalk lines as guides. first should be halfway from longest wall, running parallel to that wall, in exact center of your room.
other chalk line should run perpendicular to first between adjacent walls. Using your longest wall as guide will reduce effect of uneven floor area. Spread even layer of thin-set mortar on floor at your starting point, keeping portion of chalk line visible for reference.
Use notched edge of trowel to spread thin set approximately 1 or 4 inch thick. Place starter tile at corner of your guidelines, and maneuver it by pushing into place on top of mortar. Put spacers on each side if desired and add more tiles, keeping them even with existing tiles and with guidelines.
Continue until you reach edge of wall. Measure and cut outside tiles to fit using tile saw. wet saw is superior to dry saw since it reduces heat generated by saw blade, preventing tile dust and chipping.
Wait 24 hours for tiles to set before grouting.
We hope this information about “How to Tile Bathroom” is really helpful to you as well as other information related to Bathroom