Set Up Solar Power System

Solar power is an alternative energy source contemplated, but in many sun-rich countries can easily become the main source. Houses, which produce more than enough energy to power itself able to sell excess back to the grid for profit. Solar panels have lifetime exceeding 25 years.

Once installed, they are easy to maintain, occasionally remove by plates with a damp cloth dust and dirt. Fix solar modules in position with bracket. That will depend on the type of plate and mount you have and where you are planning to situate it.

Set Up Solar Power System

most common type of panel is fixed to roof using rails. Ground panels have freestanding mount, which may be easier to set up if you don’t have easy access to your roof, but it may need to be secured in concrete. Placing and angling your panels correctly is vital for producing highest possible output.

panels need to be in direct sunlight for as long as possible. It may even be necessary to remove branches or other obstructions. Wire solar panels to charge controller.

This will prevent solar panels from damaging batteries when they are producing high voltage. wire used should be of highest gauge possible to keep voltage losses to minimum or, when possible, use gauge size recommended by panel manufacturer. Wire charge controller to batteries.

This should be done using same gauge of wire that was used in previous step. Solar power batteries come in four different sizes with voltages of 2, 4, 6 or 12. They can be combined to provide any output level of power or voltage.

For example, wiring three small 6V batteries in series will increase the battery size to 18V while keeping current same. Wiring same batteries in parallel will keep voltage same but give three times more power. Install power inverter.

This piece is vital if you plan on powering household appliances, as it converts DC direct current solar output to standard 120 or 240V AC alternating current that appliances and light fixtures use. There are two types of power converters readily available to solar power user modified sine wave and pure sine wave. modified power inverter is usually cheaper option, but it doesn’t produce power as cleanly as pure inverter, and may have difficulty running some appliances.

power inverter can be wired directly to house’s AC breaker panel also known as fuse box . From there energy is made available to plug sockets.

We hope this information about “How to Set Up Solar Power System” is really helpful to you as well as other information related to Solar_Energy

Set Up Solar Power System Related:

How to Set Up Solar Power System

Leave a Reply

Your email address will not be published. Required fields are marked *