Menu

Remodel Acrylic Bathtub

acrylic surfaces in your bathroom, including bathtub, allowing easier cleaning and less spots. When it came time to remodel tub for any reason arrives – staining built over time, the need for new color remodeling project fit – key to the success of the project lies mainly in the preparation and careful application of materials remodeling. Remove any soap or other accessories from the surface of the tub.

With a putty knife or utility knife, carve putty that seals gap between the bathtub and the wall. Mask all faucets and handles using masking tape or protective plastic sheets. Clean the entire area down with a cloth soaked in warm water to remove surface dirt and dust.

Remodel Acrylic Bathtub

Dampen rag in mineral spirits or similar solvent-based, chemical cleaner. These cleaners will remove not only dirt and dust you missed with water, but will also remove grease, soap scum, wax and oil from surface. completely clean surface is key to successful remodeling project.

Rinse surface in clean water to remove excess cleaner. Dry area with lint-free cloth, or allow it to air dry fully, before continuing. Inspect bathtub surface for any damage such as chips, cracks, scratches or holes.

If you find any of these, fill them in with fiberglass or acrylic filler putty and putty knife or pointed trowel. Follow specific product instructions regarding drying time, you must allow putty to dry and harden completely before continuing.

We hope this information about “How to Remodel Acrylic Bathtub” is really helpful to you as well as other information related to Bathtubs

Remodel Acrylic Bathtub Related:

How to Remodel Acrylic Bathtub

Leave a Reply

Your email address will not be published. Required fields are marked *