Refinish Fiberglass Bathtubs

You can improve the appearance of your fiberglass tub old or mismatched for refinishing with suitable coating. Before you begin, you should consider some critical points. Because the fiberglass is nonporous, which is not suitable for adhesion. You must scrape the tub before painting or be stripped of its new finish.

Also, since bathtubs are subject to conditions of high humidity and coercion, you must choose durable coating that will remain under adverse conditions. fiberglass tub scrub cleaner high strength, such as trisodium phosphate, using a thick brush. Rinse the tub with rags.

Refinish Fiberglass Bathtubs

Wait two to four hours for fiberglass to dry. Enhance surface adhesion by abrading fiberglass bathtub with sandpaper. Scour tub until it feels slightly gritty.

Cover portions of fiberglass bathtub you do not want painted with painter’s tape. Protect walls adjacent to tub from paint over-spray by covering them with masking paper. Tape paper in place with painter’s tape.

Cover floor beneath bathtub with heavy-duty fabric dropcloths. Coat abraded fiberglass bathtub with acrylic latex spray primer. Hold can 8 inches from tub as you apply.

Wait fours hours for primed tub to dry. Coat primed fiberglass bathtub with appliance epoxy spray paint. Hold can 8 inches from tub as you apply.

Wait eight hours before using tub.

We hope this information about “How to Refinish Fiberglass Bathtubs” is really helpful to you as well as other information related to Bathtubs

Refinish Fiberglass Bathtubs Related:

How to Refinish Fiberglass Bathtubs

Leave a Reply

Your email address will not be published. Required fields are marked *