Menu

Recharge Air Conditioning with Freon in Chevy Silverado

Most people want cold air when driving in hot weather. If air conditioning in your Silverado is blowing hot air, add refrigerant to system can correct problem, as long as components are working properly. You can find refill kit R134 car at your local auto parts store to do job.

Look closely at air conditioning lines to check for damage. You can use kit for leak detection it easier to find leaks. These are available at your local automotive store.

Recharge Air Conditioning with Freon in Chevy Silverado

If you see any visible damage, take your Silverado to professional to recharge air conditioning system with refrigerant. Find Low Pressure Side service port. This is located on line coming out of compressor toward engine block.

Take off black cap that is covering it. Start your truck and turn on air conditioner. Use automotive air conditioner pressure gauge to check Low Pressure Side pressure.

In order to get most accurate reading, you need to have air on coldest setting and unit blowing as hard as possible. Hook refill hose up to connector on Low Pressure Side of air conditioning system. Low Pressure Side connector is smaller than High Pressure Side connector.

Because connectors are different sizes, refill kit hose should fit only on Low Pressure Side port. Hold can upright and slowly turn valve. Keep in mind that it may take 10 minutes or longer for can to empty into your system.

Close valve on refill hose when pressure is within normal range and remove hose from Low Pressure Side connector port.

We hope this information about How to Recharge Air Conditioning with Freon in Chevy Silverado is really helpful to you as well as other information related to Air Conditioner

Recharge Air Conditioning with Freon in Chevy Silverado Related:

How to Recharge Air Conditioning with Freon in Chevy Silverado

Leave a Reply

Your email address will not be published. Required fields are marked *