Menu

Protect Painted Wall Against Your Bathroom Vanity From Water

Painting offers little protection to the wall against water damage moisture-rich environments. Because of this, installation of toilet against the wall with nothing but painting as finished invites damage to the wall of water splashing. This damage can lead to the need for early repairs, including replacing gypsum material forming the wall surface. To avoid this, you can be applied waterproof paint on the top layer.

— top layer resistant material layers of clear water — brushes in place and prevents water from penetrating through the wall paint and wall protection against damage from them without the paint color. Wash the surface of the wall behind toilet and around, using a cleaning mixture created with about 1 teaspoon. Soft mixed thoroughly in a bucket containing liquid soap gallon of water. Use a sponge to clean the wall, removing any dirt or soap.

Protect Painted Wall Against Your Bathroom Vanity From Water

Rinse after washing with clean water, and then pat wall dry with piece of clean cloth. Remove any caulk present surrounding vanity against wall by cutting it away with utility knife. Clean any residue left from caulk with piece of cloth dipped in isopropyl alcohol.

Place strip of masking tape along vanity edge, and put drop cloth along base of wall where you need to apply sealer. Select waterproofing topcoat that’s compatible with paint type used on your wall. For oil-based or solvent-based paints, you need oil-based or solvent-based topcoat.

For acrylic-based or latex-based paints, you can use acrylic-based or latex-based topcoat, as well as oil-based or solvent-based solution. Use clear topcoat to preserve present color of your wall. Dilute waterproofing topcoat according to manufacturer’s instructions, if necessary.

Apply topcoat to wall that vanity rests on. Use paintbrush to apply topcoat along edges of surface, brushing on strip of coating approximately 3 inches wide. Cover rest of wall, using paint roller and applying topcoat in overlapping rows.

Begin with 2-inch overlap of brushed edges. Wait for topcoat to dry. Check topcoat manufacturer’s instructions for drying times.

Apply two to three more coats, allowing each coat to dry before you move on to next. This will allow you to build up sufficiently waterproof layer.

We hope this information about “How to Protect Painted Wall Against Your Bathroom Vanity From Water” is really helpful to you as well as other information related to Bathroom

Protect Painted Wall Against Your Bathroom Vanity From Water Related

How to Protect Painted Wall Against Your Bathroom Vanity From Water