Paint Over Cracked Paint in Bathroom

Cracked paint in the bathroom is usually due to plaster or drywall substrate underlying deterioration or flex with changes in temperature and humidity. Bathrooms can be hostile environments for painting due to high humidity. Paint on cracked paint without proper preparation results uneven surface and peeling paint within fairly short time.

If you do not mind some hard work and disorder can be treated with the cracked paint work and have bath soft and durable paint. Prepare the room by cleaning the counter, removing shower curtain and take the towel bars and switch plate covers-off wall. open window or turn on the fan before you start working to speed drying.

Paint Over Cracked Paint in Bathroom

Clean all surfaces to be painted. Use mild detergent and wipe down walls, ceiling, and trim, finishing up with clean water rinse. Make sure walls are squeaky-clean and free of hairspray residue, soap scum, and mildew.

Use chisel-edged scraper to remove as much peeling and cracked paint as possible. Spread thin coat of ready-mixed joint compound over uneven areas where you’ve removed old cracked paint. Use 9- or 12-inch drywall knife.

Since joint compound shrinks as it dries, it may take two or three coats to get level surface. Sand lightly in between coats to knock down high spots, and do final sanding with medium-fine sanding sponge. Wipe sanding dust away with damp sponge.

Mask edges of anything you aren’t painting, such as countertops, tile, and baseboards. Use blue painter’s tape for cleanest lines.

We hope this information about “How to Paint Over Cracked Paint in Bathroom” is really helpful to you as well as other information related to Bathroom

Paint Over Cracked Paint in Bathroom Related:

How to Paint Over Cracked Paint in Bathroom

Leave a Reply

Your email address will not be published. Required fields are marked *