Menu

Make Solar Energy Panels With Used Glass Bottles

A solar panel can appear to be too complicated to build for garage or in the kitchen, but crude solar panel can be manufactured by a handful, with ordinary tools, scrap pieces, some copper sheet remnants in clear glass bottles and kitchens burner or hotplate. This easy-to-build project makes good science project for children under parental supervision. Get old box or in clear glass bottles with wide mouth.

Snapple bottle, or something similar, are ideal. Bottle neck or opening that is too narrow will, copper strips are cut later too small to make useful. Put bottles in the dishwasher and run it through washing and rinsing them soak.

Make Solar Energy Panels With Used Glass Bottles

Do not use dry cycle. Use plastic scouring pad to remove soaked labels from bottles. sink of warm water also will work, but will require more elbow grease.

Cut most of cardboard case away, so that only bottom and frame remain. Leave just enough cardboard around edges of bottom to give 24 bottles little stability. end result should leave plenty of exposed surface area for soaking up sunlight.

Measure height of one bottle and width of its mouth. Cut 48 strips from copper sheeting, using sheet metal sheers. strips should be cut using measurements you took in Step 4, with two adjustments Subtract 1 or 4 inch from bottle’s height and subract 1 or 3 or 1 or 4 inch from bottle’s width.

This will ensure good fit and that copper strips won’t come into contact inside bottle.

We hope this information about “How to Make Solar Energy Panels With Used Glass Bottles” is really helpful to you as well as other information related to Solar_Energy

Make Solar Energy Panels With Used Glass Bottles Related

How to Make Solar Energy Panels With Used Glass Bottles

Leave a Reply

Your email address will not be published. Required fields are marked *