Install Wall Tile in Bathroom

Any type and size of tile can be installed on the bathroom wall, wall tiles, but are good for wall installations only. Remember this rule when buying tiles bathroom wall tiles can be put on the wall, but you can not put tiles on the floor. most popular wall tiles are 4 x 4 inches square tiles that are generally solid colors with shiny finish.

These tiles are generally easier to install in the bathroom wall, after all, that’s their purpose. Measure the dimensions of the walls and tiles would like to buy enough tiles to cover square feet, and a little more than 10-15% for cuts and waste. wall tiles four by four inches usually come in boxes of 100 tiles 12.5 square feet.

Install Wall Tile in Bathroom

Clean wall to make it free from any dust, dirt, and grime. Wall tiles can be installed directly to painted or unpainted drywall. If drywall is painted with semi-gloss or hogh gloss paint, paint must be treated with TSP solution, or liquid sanding solution, to degloss paint surface so tile will stick to wall.

Measure walls that will be receiving tile and mark middle point of wall. Draw thick line down middle of each wall. This will be starting point for tile.

Place dropcloth on floor underneath wall being tiled. Use margin trowel to load acrylic mastic onto v-notch trowel. Starting at floor level, spread mastic onto 2-foot x 2-foot area on wall using upstrokes.

Place edge of first tile on middle line with spacers between tile and floor. Repeat this to cover mastic along bottom of wall, and then work your way up wall to cover mastic with tile. Do not slide tiles together.

Sliding tiles together will cause mastic to gather in grout lines and indifficult to remove. Touch edges of tile together before pressing tile into mastic. Repeat this process until most of wall is covered.

When whole wall is covered, except for last row of tiles that will meet corners of other walls, stop and measure sizes that remaining tiles must be cut to to finish wall to corners. Cut these tiles at same time if they are all same size. If wall is not square and each tile must be cut to different sizes, cut and install each tile individually, testing fit of each tile before spreading mastic on back of tile called back-buttering and adhering it to wall.

Repeat this process for other walls that will be tiled. Then, allow mastic to dry according to drying specifications on container.

We hope this information about “How to Install Wall Tile in Bathroom” is really helpful to you as well as other information related to Bathroom

Install Wall Tile in Bathroom Related

How to Install Wall Tile in Bathroom

Leave a Reply

Your email address will not be published. Required fields are marked *