Menu

Design Your Own Solar Power System

Solar energy uses photovoltaic modules, is becoming increasingly popular as a means of reducing health care costs and keep clean environment to help. All solar systems begin determine with the same basic design principles, which are supplied with power, how much power that requires, and then System sketch to meet those needs. Design phase is not so difficult, just requires some research and a little math.

determining devices within your solar power system. Go to any unit, note how many watts consumed, and then form estimate. Daily use of the device Each device should have this information on the plate usually with UL logo.

Design Your Own Solar Power System

Light bulbs depend on wattage of individual bulb. Wattage is hourly consumption figure, making this easy to calculate For example, let’s take laundry room, which on typical usage day has two 60 watt light bulbs for three hours 360 watts and two uses of washing machine 2,300 watts for total of 2,660 watts. Convert wattage figure to amps. You will also need to know voltage, which for our example will be typical American outlet voltage of 110 volts. formula is amps = watts or volts. In this case, that is amps = 2,660 or 110, or 24.1 amps.

Use amps determined in Step 2 to describe needs of solar system’s battery. To prolong their lifespan, batteries should never be drawn below half of their capacity, so that means battery should be 150 percent of amps from Step 2. In this example, that is about 36.2 amps.

If any rounding off needs to be done, round up to increase margin of power available. So, system needs 110 volt battery with at least 36.2 amp capacity. Let available batteries guide your choice, but always go up on amps.

Determine total power output that solar panels need to achieve. Your panels need to be selected on basis of meeting entire 2,660 watt demand determined in Step 1 during standard 6 hours of full daylight they will receive. That requires minimum of 443.3 watts. Let available panels guide your choice, but as with amps, always go up on wattage output when rounding-off is needed.

Measure space proposed for your solar panels. This is physical limit on placement and arrangement of your solar power system, and may influence your choice of panels. good space-saving solution is to use solar shingles.

We hope this information about “How to Design Your Own Solar Power System” is really helpful to you as well as other information related to Solar_Energy

Design Your Own Solar Power System Related

How to Design Your Own Solar Power System

Leave a Reply

Your email address will not be published. Required fields are marked *