Menu

Construct Homemade Solar Panels

MacGyver is not only a man who can take ordinary household materials and to make high-tech products. You can also do it. Cost of solar systems negated savings involved, to buy them.

But homemade solar panels for your home will help you spend less money while still receiving the same cost advantages. Homemade solar panel materials are in local hardware stores. In order to save as much money as possible going Yards save or excess construction is optimal. with Plexiglas blade to cut Use table saw 2 pieces of each following dimensions 2-foot-by-3-feet, 2-inch-by-3-meter and 2-inch-by-2-foot.

Construct Homemade Solar Panels

Place one of of 2-feet-by-3-feet plexiglass pieces flat on level surface. Place 2-inch-by-3-feet plexiglass pieces vertically on sides of 2-feet-by-3-feet plexiglass piece. Fill interior edges of plexiglass pieces with waterproof silicone caulk.

Place 2-inch-by-2-feet plexiglass pieces horizontally on top and bottom of 2-feet-by-3-feet plexiglass piece. Fill interior edges of plexiglass pieces with waterproof silicone caulk. four pieces form walls around flat plexiglass piece.

Let caulk dry for six hours. Drill quarter-inch hole in top right wall of plexiglass located at top of uncovered frame. Use quarter-inch carbide tip drill bit.

Place masking tape on area before drilling. Masking tape prevents cracking of plexiglass material. Place solar cells side-by-side to make row.

Connect all positive wires on back of solar cells. Connect all negative wires on back of solar cells. Twist wires in clockwise motion to connect them.

Wrap connected area with electrical tape.

We hope this information about “How to Construct Homemade Solar Panels” is really helpful to you as well as other information related to Solar_Energy

Construct Homemade Solar Panels Related:

How to Construct Homemade Solar Panels

Leave a Reply

Your email address will not be published. Required fields are marked *