Charge Air Conditioner in Mitsubishi Mirage

If your Mitsubishi Mirage is having air conditioning problems, you may be able to recharge without having to take it to mechanic shop. warning to recharge air conditioning system yourself is that vehicle needs to have some cold air coming out of vents, which means that there is still certain refrigerant left in system. It should be noted that refrigerant charging involves use of chemicals that are dangerous to body and environment, which regulates Environmental Protection Agency closely use of certain refrigerants. Mirage lift hood and hold it open. Find valves setting high and low service for air conditioning system, which should be located near top left of engine. Since mid-1990, mounting valve for use refrigerant R134A two valves of different sizes for recharging, sized at 13 and 16 millimeters.

Look under close fitting side hose accumulator and compressor is connected. top fitting is elsewhere compressor near hose that connects condenser. Consult your owner’s manual to determine Mirage correct pressure refrigerant, which can vary between different years of manufacture.

Charge Air Conditioner in Mitsubishi Mirage

Otherwise, fill system until low-pressure gauge measures between 25 and 40 pounds per square inch, or psi. Attach service hose valve from recharge kit to refrigerant can. Rotate and tighten valve and hose connection until can is punctured.

Turn valve slightly in opposite direction to loosen it so that air is bled from hose. Shut off valve once air is bled from hose and refrigerant can. Hold refrigerant can upright, placing it near low service fitting on Mirage’s air-conditioning system.

Screw recharging kit’s hose onto low service fitting. Screw high-pressure gauge from recharge kit onto high-pressure service fitting. If your kit has high-pressure gauge, it should read between 225 and 250 psi when your Mirage’s air conditioning system is fully recharged.

Turn on engine and turn air conditioning on full blast. Open valve on recharge kit so refrigerant is pulled into vehicle’s air-conditioning system. It is useful to have friend inside vehicle monitoring temperature of air coming from Mirage’s vents. Wait for five to 10 minutes to allow air conditioning to be fully recharged. Continue to monitor low-pressure gauge on recharge kit.

We hope this information about How to Charge Air Conditioner in Mitsubishi Mirage is really helpful to you as well as other information related to Air Conditioner

Charge Air Conditioner in Mitsubishi Mirage Related:

How to Charge Air Conditioner in Mitsubishi Mirage

Leave a Reply

Your email address will not be published. Required fields are marked *