Caulk Bathroom Tubs

Applying caulk seam where the tub and the wall, creates waterproof to protect inside walls of water damage barrier. Water damage leads to mold, mildew and putrefaction of wood. caulking gap also protects the substrate behind tiles or composite wall covering damage.

water resistant substrate is ideal for backing tile or wall covering, but some houses have drywall behind wall cladding. When wet drywall, wall loses its rigidity, it becomes spongy and may collapse. area protection is necessary for safety and structural well-being of the house.

Caulk Bathroom Tubs

Remove old caulk from surface. Scrape old caulk with flexible plastic putty knife or apply caulk remover. Vacuum seam to remove bits of dirt, old caulk and debris.

Wipe surface next to seam on both wall and bathtub rim with denatured alcohol to remove dirt, soap scum and oils. Fill bathtub with water. Use care to avoid getting seam wet.

Filling bathtub with water pulls seam to its widest point with water weight. If you do not fill bathtub with water prior to caulking, weight of water in tub will pull caulk away from seams. Apply strip of low-tack painter’s masking tape to wall 1 or 4 to 1 or 2 inch away from seam.

Apply second line of masking tape 1 or 4 to 1 or 2 inch from seam on rim of tub. Insert silicone caulk into caulking gun and cut tip of caulking tube with utility knife or use squeeze-tube of caulk. Place tip of caulking tube on seam at edge of tub at 45-degree angle.

Squeeze trigger while you move to corner. Create one continuous line of caulk rather than small dashes of caulk. End at corner and begin new bead from corner to next corner in one line.

End at corner and begin last line from corner to edge of tub.

We hope this information about “How to Caulk Bathroom Tubs” is really helpful to you as well as other information related to Bathroom

Caulk Bathroom Tubs Related:

How to Caulk Bathroom Tubs

Leave a Reply

Your email address will not be published. Required fields are marked *