Caulk Bathroom Sink

Caulking creates moisture-proof barrier between the basin of the sink and surrounding counter. If water builds up around faucets or forms pools on the counter after use, it can be a sign that the mastic is no longer working as well as it should. When the caulk around your bathroom sink is discolored, cracked or covered in mold, it is time to replace it.

caulking around the sink is one of the repair projects simpler and less risky housing, and can be completed in minutes. Scrape old caulking around the edges of the sink basin with small spatula or a tool painter. Remove all traces of old caulk.

Caulk Bathroom Sink

Clean sink and countertop around basin thoroughly with cleanser and scrubbing sponge. If there are any traces of mold or mildew, use bleach-based cleanser to kill it. Dry area with paper towels.

Load caulking cartridge inside caulking gun according to manufacturer’s instructions. This job requires only narrow stream of caulk, so trim nozzle of caulk near tip. Use razor cutter, and cut it at 45-degree angle.

Place nozzle up against seam between basin and countertop and hold caulking gun at 45-degree angle from countertop with angle of cut tip facing directly into seam. Apply caulk using gentle, steady pressure around entire seam. Move slowly yet consistently.

If you move too slowly, you’ll end up with glut of excess caulk, too fast, and you’ll create broken line. Press damp paper towel into seam, and pull it along length of seam, using your fingers to smooth top of caulk and press it firmly into seam. If you’re dissatisfied with result after first attempt, try again with fresh paper towel.

We hope this information about “How to Caulk Bathroom Sink” is really helpful to you as well as other information related to Bathroom

Caulk Bathroom Sink Related

How to Caulk Bathroom Sink

Leave a Reply

Your email address will not be published. Required fields are marked *